Talaris MiniMech 010, Integration Manual

Page: 9 / 20

9
site preparation
Delivery slot dimensions
The most important item when integrating the
MiniMech into a cabinet is that the delivery slot
of the MiniMech is correctly aligned to the slot
in the cabinet.
If the MiniMech is moved out from and into the
cabinet e.g. on slides, the delivery slots must
always be aligned correctly when the MiniMech
is pushed in. This could be achieved by using a
docking device by adjusting the position of the
MiniMech.
Note also the dimensions of the cabinet deliv-
ery slot and the distsance from the reference
point to the bottom surface of the cabinet top
plate.
• If the slot in the cabinet is too narrow, the
notes may jam.
• If the distance between the cabinet and the
MiniMech is too large, the notes may slip
between cabinet and machine and miss the
delivery slot.
• Depending on the wall thickness, the cabinet
delivery slot may have to be chamfered to
give access to the notes.
dimensions
�������