Talaris MiniMech 010, Integration Manual

Page: 6 / 20

6
site preparation
general
General
This section describes different alternatives of instal-
lation and other general requirements.
When planning the MiniMech installation, the follow-
ing "four modes of operation" must be considered:
• Normal operation
The transport of notes through the delivery slot is
controlled by the host computer. The MiniMech
needs not to be accessible.
• Refilling / exchanging the note box
Space must be available to enable withdrawal
and insertion of the note box.
• Operator maintenance
Space must be available at the rear and top side
of the MiniMech to enable access to the transport
path for removing stuck notes in case of fault.
• Service and maintenance
Space must be available around all sides of the
MiniMech. This can be achieved by mounting
the MiniMech so that it can be removed from the
cabinet.
Safety and EMC requirements
The system manufacturer is responsible for making
sure that the appropriate safety and
EMC requirements are used.
Assembling the MiniMech in a cabinet.
When assembling the MiniMech into a cabinet, we
recommend the use of the two slots and two holes
as shown in diagram to firmly attach the MiniMech
into the cabinet.
Recommendations for transporting, pulling and
lifting MiniMech
The original packaging is designed to ensure
safe travel for the MiniMech. We therefore rec-
ommend that you do not dispose of the pack-
aging as it can be used for future transportation.
When lifting the MiniMech, lift as shown below.
When transporting the MiniMech and not us-
ing the original packaging the Cassette must be
secured with tape as shown below.
�������
�������