background image

Model

MS-12TE

MS-12FE

Detection system

Passive infrared

Coverage

When horizontal 

detection Angle: 90º 

Detection distance: 40’ (12m)

2 sets of MS-12TE

Horizontal zone: 7 zones

sensor (Full cover 180º)

Downward zone: 7 zones

Coverage adjustment

Horizontal : ±90º

Detection distance : 10’~40’ (3m~12m) [7 steps]

(By adjusting vertical angle of downward curtain)

Supply voltage

12 to 30V DC (Non polarity)

Current consumption

35mA MAX

40mA MAX

Alarm output

Dry contact relay output N.C/N.O. selectable N.C/N.O

*Contact capacity: 30V (AC/DC), 0.5A MAX

(Resistive load)

*Contact operation: Detection time+off delay

(2sec.-5min.approx)

*Day light : 10 lux (night) - (day & night)

Tamper output

Dry contact relay output N/C

*Contact capacity: 30V (AC/DC), 0.5A MAX 

(Resistive load)

Operation LED

Red LED

Blinking at Warming up

Lighting at alarm (LED disabled)

Counts selectable switch

Once/three times (with a switch) 

Sensitivity adjustment

*Approx. 30% (L) – Approx. 170% (H) (By volume)

Detection mode

AND/OR selectable

Connection

Terminals

Ambient temperature

-4ºF to 122ºF (-20ºC to 50ºC )

Mounting position

Indoor/Outdoor (Height 0.8 – 1.2m)

Weight

13.7oz (390g)

16.5oz (470g)

Appearance                                      Body: AES resin       Lens: PE resin 
Accessory

Tapping screw: 2

Tapping screw: 2

Area masking sheet: 1

Area masking sheet: 2

Optional

Wall mount attachment (BW-24)

Pole attachment (BP-22)

TAKEX Europe Limited.

Aviary Court, Wade Road,
Basingstoke, 
HANTS RG24 8PE
UK
Tel. +44(0)1256-475555  
Fax. +44(0)1256-466268
Email: [email protected]  
Webpage: www.takexeurope.com

MS-12FE SI-10/04 (CRI 175)

KNOCKOUT

11.5mmX8mm

(0.45”X0.31”)

KNOCKOUT

11.5mmX8mm

(0.45”X0.31”)

OPERATION LED

80mm
(3.15”)

234mm (9.21”)

209.5mm (8.25”)

107mm (4.21”)

91mm

(3.58”)

88mm
(3.46”)

MOUNT HOLE

COVER LOCKING SCREW

ø4.5mm

2-ø0.18”

Limited Warranty
All TAKEX Products are subject to 5 years warranty.
All other warranty periods agreed are subject to a formal written agreement.
During the warranty period, TAKEX Europe Ltd. will repair or replace, as its sole
option, free of charge, any defective parts returned prepaid.
Our warranty does not cover damage or failure caused by Acts of God, abuse, misuse,
abnormal usage, faulty installation, improper maintenance, unauthorised customer
modifications or any repairs other than those carried out by TAKEX Europe Ltd.

Summary of Contents for MS-12TE









Reviews: