(3) Adjust the shape of the neck cushion to fix it to the metal fittings,
and attach the basin side snap buttons of the neck cushion to the
fastening pins.
(2) Attach the seat side snap buttons of the neck cushion to the
fastening pins on the metal fittings.
(1) Align the neck cushion as shown in the illustration, and fit the neck
cushion on the metal fittings. (Make sure the attachment
orientation is correct.)
Attach neck cushion
The fastening pins can be removed.
Take care not to lose the fastening pins.
The short edge faces
the basin side
The long edge faces
the seat side
Remove neck cushion
Caution
Preparations
Neck cushion
Metal fitting
Snap button
Fastening pin
Basin side
Seat side
Snap button
Snap button
Hold the Snap buttons (4 locations) when removing the neck cushion.
Applying excessive force to remove the neck
cushion may damage the parts.
Attach head pillow
Align the orientation of the head pillow as shown in the illustration, and insert.
Note
Head pillow
(underside)
The neck cushion and head cushions are consumable supplies.
Replace them if they are extremely dirty or the surface has deteriorated. (available at an additional cost)
12
Metal fitting
