12
Precautions for Use
●
Do not use for purposes other than beauty/barber treatment
This product is a professional device intended for the use in beauty and barber salons.
Shall not be used by persons other than specialists in barber/beauty treatment or a person qualified as
an esthetician.
●
The maximum load is 1,350 N (135 kgf)
The rising speed may be slower when the load is near the maximum value.
●
Do not apply heat
It will be the cause for the alteration of quality/color.
●
Do not allow a sharp object to contact the leather
If a sharp object, such as scissors, contacts the leather, it may tear.
●
Do not put an object other than human on the seat
It may cause the deformation or breaking of leather or corrosion.
●
Promptly wipe off when chemicals have adhered
When the chemicals have adhered to the leather, base covers, etc., promptly wipe off.
It may cause a change in quality/color.
●
Do not use strongly acidic or strongly alkaline cleaning solvents
Do not use cleaning solvents containing mainly caustic soda (NaOH) or caustic potash (KOH) to clean
the drain pipe. Never pour thinners, alcohol, nail polish remover, gasoline or kerosene into the drain.
Failure to follow this instruction may cause damage to the drain hose.
●
Do not apply steam directly to the leather
When using the steam to perform hair/scalp care and other work, do not apply the steam directly to
the leather. Failure to follow this instruction may cause degradation of the leather.
●
Do not forcefully lift the seat, backrest, or leg rest
Otherwise, the seat may malfunction or fail.
●
After use, wipe water away from all parts other than the basin
Leaving the unit with water on it may cause damage to the main body, and make dirt difficult to
remove.
●
Lower the seat to the lowest position after working hours
Lower the seat to the lowest position after working hours. In this condition, no load is applied to the
mechanical parts of the product, lengthening its service life.
●
Do not remove the cover of holder forcibly
Failure to follow this instruction may cause damage to the product.
●
Put shower head securely into the holder
Failure to follow this instruction may cause water to spill out of the basin, covering the
customer with
water.
●
Do not collect water until it overflows from the shower hose slot
The amount of water should be below the designated maximum water level. [Page
32
]
