background image

33

Return the seat to its initial position

Check that the seat has returned to its initial 

position. 

Follow the procedure below to return the seat 

to its initial position.

- Holding down (pressing for one second or 

longer) the Seat lowering switch will make 

the unit "beep", then automatic mode will 

begin and the seat will return to the initial 

position.

Instruct the customer to sit on the seat from the side

Instruct the customer to sit on the seat from the side.

Next, instruct them to face the front, and sit back in the seat.

If customer does not sit back in the seat properly, their back may slide or they may not be able to be 

guided into the appropriate position.

[Initial position]

When lifting or lowering the seat, check and make sure that there are no people or 

obstructions near the seat. Failure to follow this instruction may cause injury, or 

damage the seat.

Warning

- Make sure that there are no people or objects under the seat or basin. In particular, 

make sure to check for babies or children.

- Check that there are no people or objects between the seat and floor.
- When lifting or lowering the seat, check that there is sufficient space between the 

customer's feet and wall in front.

- Never touch the switch when working between the seat and basin. Failure to follow 

this instruction may cause the user to become trapped, leading to injury.

Always check that the seat has returned to its initial position when guiding customers 

to. 

Sitting on and getting up from the seat in its lifted position may damage the seat, or 

cause injury.

Caution

Caution

- Make sure that customer does not sit on the end of 

the seat. Doing so may cause damage to the seat.

- Be sure to check that the customer's fingers, clothes 

or objects are not in the gap between the seat and 

backrest, and that their fingers are on their body or 

seat. Failure to follow this instruction may cause 

their fingers to get stuck, leading to injury.

- If the customer wears specially-processed clothes, 

the colors or patterns may transfer on to the seat.

When shampooing

Summary of Contents for YUME ESPOIR

































































Reviews: