This completes the installation of the mist cap. At this time, insert the flexible hose with the [UP] mark
on the inner cap joint N facing [UP], while paying attention not to twist the mist cap.
(See the section "Preparation" on page 9.)
Detach the turban.
Detach the hook and loop fasteners, and then remove
the mist cap.
Wipe off the water accumulated in the mist cap
with a towel or the like. Drain the water in the
flexible hose, and then detach the cap from the
flexible hose.
Release the stopper, and loosen the
string.
Detaching the Mist Cap
Detaching the mist cap without draining the water may cause dripping.
The water returned into the flexible hose will enter the drain tank
provided at the front of the main unit. Discharge the water
accumulated in the tank before the water level exceeds the indicated
line on the drain tank.
・Be sure to drain the water accumulated in the flexible hose
after use.
・Be careful not to bend or twist the flexible hose.
・Use of the machine without draining the water accumulated
in the flexible hose or with the hose bent or twisted may
make it difficult to atomize the mist or may result in
machine failure or accidents due to increased temperatures.
Be sure to drain the
accumulated water
after each operation.
６
１
２
３
４
Information
CAUTION
19
Stopper
Mist cap
Flexible hose
Pay attention to dripping when removing the mist
cap, since water drops are accumulated in the mist cap.
Information
Flexible hose holder (option)
Summary of Contents for SPA MIST II AK-160
Page 2: ......
