3
使用条件
Usage conditions
■ Hot water supply and water supply conditions
・
Use a pressure between 0.1 and 0.4 MPa (1 to 4 kgf/cm2). If multiple RS SWING are used,
ensure that the pressure does not drop below 0.1 MPa (1 kgf/cm2).
・
Set the water supply pressure
≧
hot water supply pressure.
・
Set the difference between the hot water supply pressure and water supply pressure to within
0.2 MPa (2 kgf/cm2).
・
Set the hot water temperature to 80
℃
or less.
・
Set the temperature 10
℃
or highter than the shower temperature used.
Water used
Hot water supply,
water supply pressure
Hot water temperature
into the product
Water boiler
・
Public water supply (do not use non-drinkable well water or water that contains rust or sand.)
・
If the water hardness is 80 ppm or higher, install a water softener to prevent the buildup of scale
within the basin body. Aeration may be minimal when using shampoo even if drinkable well
water is used, so a water softener should be installed.
・
Do not use steam with the hot water supply.
