Legrest Rising Settings
Angle
Setting (1)
Setting (2)
Keeping the legrest fixed
(not to rise)
Maximum Setting
(position at delivery)
Approx. -15° from
horizontal
Approx. -35° from
horizontal
Approx. -50° from
horizontal
Approx. -85° from
horizontal
4. Insert the legrest adjustment pin based on the desired setting.
Hole for Setting (2)
Hole for Setting (1)
Hole at delivery
Insert the snap pin.
4
LANCER Installation Manual
3. Pull out the legrest adjustment pin.
Pull out the legrest adjustment pin.
CAUTION
Legrest adjustment pin
1. To set the legrest rising angle to Setting (1), insert
the legrest adjustment pin into the Hole for Setting
(1).
2. To set the legrest rising angle to Setting (2), insert
the legrest adjustment pin into the Hole for Setting
(2).
3. Do not insert the legrest adjustment pin into any
holes if you want the legrest not to rise. (Carefully
store the legrest adjustment pin in order not to
lose it.)
Insert the legrest adjustment
pin into the desired hole.
5. Insert the snap pin into the legrest adjustment pin.
B
e sure to securely insert the snap pin as
shown in the below-right figure to retain the
legrest adjustment pin.
6. When the adjustment is completed, recline the backrest of the chair to
check the raising angle of the legrest.
