Safety Precautions (Be sure to observe them)
2
This product may malfunction under environment with electromagnetic
interference waves. Do not install this product near equipment
generating electromagnetic waves such as communication equipment,
elevator. Do not use devices generating electromagnetic waves such
as cell phone around this product.
•
Have installation or mounting of the equipment performed by
a professional (from us or our specified representative).
The chair must be installed on flat and solid flooring.
If the chair is installed to an area where the flooring surface is
inclined at 5° or more, it may cause the chair to fall over.
•
•
When operating the chair, mind the surrounding area
Care must be taken when setting the preset position
Do NOT apply excessive weight to the legrest or armrest
Care must be taken after changing the preset position
Care must be taken when your customers step up to or step down from the chair
When setting the presetting position, before or during setting, sufficient care
must be taken to ensure that bodies, hands, feet, or/and obstructions are not
around the operating range. If care is not taken to do so, it may result in being
pinched by the chair, and may cause bodily harm or property damage.
After changing the preset position, sufficient care must be taken to ensure that bodies, hands,
feet, or/and obstructions are not around the operating range. If care is not taken to do so, it
may result in being pinched by the chair, and may cause bodily harm or property damage.
Before or during operation of the chair, sufficient care must be taken to
ensure that bodies, hands, feet, or/and obstructions are not around the
operating range (up/down directions of the chair, backrest and legrest, and
rotating directions of the chair). If care is not taken to do so, it may result in
being pinched by the chair, and may cause bodily harm or property damage.
Be sure the chair rotation is locked when your customers step up to
or step down from the chair. Especially when a customer steps up
to or steps down from the chair from/to a wheel chair, be sure that
the there is no wheel chair around the operating range of the chair.
when feet or casters hit any of the foot switch, the chair moves
suddenly. It may cause bodily harm or property damage.
Care must be taken under environment with electromagnetic interference waves
Be careful during installation
Do not sit on the legrest or armrest. Also, do not apply more
than the necessary weight to the chair. Doing so may cause
the chair to fall over or break.
Do NOT sit on the backrest
Sitting on the backrest may result in bodily injury or may cause
the chair to break from falling over.
Do NOT sit anywhere except the designated sitting area
Never sit on the headrest, armrest, or on the front edge of the
backrest,
the legrest, and the step when the backrest has been reclined or the
legrest has been raised. Also, do not apply more weight to those parts
than necessary. Doing so may cause the chair to fall over or break.
Be careful when reclining or raising the backrest
When reclining or raising the backrest, take sufficient care to
ensure that customers’ fingers or other objects are not between
the backrest and the seat. Not doing so may result in bodily
injury from pinching or other such accidents.
Do NOT let your customers lie face down
Do not let your customers lie face down. If the chair moves
suddenly, it may cause bodily harm.
Disassembly and repair should only be performed
by a skilled technician
Do not attempt to disassemble or repair the equipment on
your own. To do so might cause electric shock during
disassembling or repairing, a fire due to improper repair,
or malfunction resulting in severe injury.
Do NOT ground the product to:
Water pipe
Hard plastic is used for many pipes, and it is not possible to
ground to them completely.
Gas pipe
There are risks of explosion or/and fire.
Lightning rod and telephone cable.
Care must be taken when turning the chair
When the power goes down
•
To avoid unpredictable move of chair when the power comes backon, turn off the main switch and unplug the power cord
from the outlet. Also turn off the main switches of all appliances connected to the service outlets and unplug their power cords.
If the seat position is raised (e.g., position at shampoo) when the power goes down, it is impossible to lower the seat. Utmost care
(e.g., support your customers) must be taken when your customers have to go up to/down from the chair set at the raised
position so that your customers are not injured or the chair doesn’t fall over.
•
After turning the chair, make sure to lock (stop) the chair’s turning by depressing rotation lock switch. Especially while the backrest
is reclined, pay attention to lying position and movements of body, hands and legs of customer, and make sure of customer's
safety before turning the chair. Before using automatic operation, confirm the chair rotation is locked. The chair’s sudden move
may cause bodily harm or property damage. Care must be taken so that adjuster under the step will not touch the power cord
or the chair will not be toppled even if someone steps up to the step.
Warning
Care must be taken with customers and children
Care must be taken to supervise customers in order to prevent an
unintended accident caused by a customer (especially children)
playing with or operating the chair in a careless manner.
•
•
•
