Cancel function
If you want to stop the automatic operation of the chair using the preset switch or the auto return switch,
pressing either switch can stop the operation. The cancel function works, and the operation will stop.
(A “beep” sound is heard only when the auto return function is canceled by pressing the preset switch.)
You can use any switch on the
control panels to stop the operation.
Right
Left
Base operation unit
Control panel
How to Use
15
1
Remove the step.
Remove the mounting hardware from the guide to remove the step.
2
Mount the step.
Engage the hardware to the guide placing it to the positioner. Insert the nuts of the step
(back side) to the holes securely.
After mounting the step, make sure that the mounting hardware is securely
engaged in the guide, the nuts are inserted to the holes, and there is no
wobble in the step. If there is any wobble, the step may not be stable when
your customers step up to or step down from the step. Also, when raising the
legrest, it may rub against the upper side of the step.
Make sure that the legrest is raised when mounting or detaching the step.
Care must be taken when carrying or placing the step since it is very heavy.
Falling accident may result in severe injury.
Care must be taken when extending the adjuster so that it will not touch the
power cord when the chair is rotated.
(5) Using the Removable Step (AB-IVFW)
The step can be removed for a customer in a wheelchair, etc. Wh
en you remove the step,
raise the legrest so that you can see the guide part.
Adjuster
Warning
Mounting hardware
for the step
Nut
Loosen
Extend
Fasten
Shorten
Legrest
Guide
Positioner
Holes for nut
The adjuster is on the back side.
Step (Back side)
Caution
