It is not necessary to use the headrest when the head of a customer does not need to be
supported such as back shampoo.
The headrest will be locked at the position
where you release it.
* The maximum pulling out position is marked
on the headrest support frame by (—) mark.
When pulling up the headrest support frame
further than this position and removing it
completely from the backrest, insert the
headrest support frame into the slot from
which you removed it while pushing the
headrest lock button.
While pressing the headrest lock button, depress the
headrest. When returning the headrest, be sure to
hold the headrest as shown in the picture.
Make sure that there are no obstructions around the chair when turning
the chair around with the headrest being raised.
The (—) mark shows that this is the highest end of the headrest. Do not pull
up the headrest further than this position.
Take care so that the support frame portion will not be splashed with water
or liquid cosmetics. If the support portion is splashed, wipe it off immediately.
If rust occurs or frictional force decreases, the headrest may not be locked
sufficiently.
Do not apply excessive weight to the raised headrest or pound it. This may
cause failure of the equipment.
When returning the headrest, be sure to hold the headrest.
Take care not to have your fingers, hands, etc pinched between the
headrest and backrest.
As to the backrest removable models, do not pull out the headrest with the
backrest being reclined. The upper backrest may fall.
The (—) mark shows that this is the highest
end of the headrest. Do not pull up the
headrest further than this position.
Headrest
Headrest
support frame
Headrest
lock button
Headrest
lock
button
How to Use
(3) Adjusting the Headrest, Backrest, and Legrest
2 Return the headrest to the original
position when you finish using it.
1 Insert your hand between the headrest
and the backrest and then pull up the
headrest.*
Caution
11
1. Pulling up the headrest