8
Precautions for Use/Maintenance
●
Turn the power off if this product is not going to be used for a long period of time, or during
maintenance
Always turn the power off after work, if this product is not going to be used for a long period
of time, or during maintenance. Failure to follow this instruction may cause ground leakage
fires, electric shock or burns due to insulation deterioration.
●
Adjust the water temperature while checking the temperature by hand
When adjusting the temperature of the water, reduce the volume of water, point the shower
head away from the customer and check the temperature by hand. Take care when doing so,
as hot water may come out of the shower head.
Safety Precautions
(Adhere to these precautions at all times)
Warning
●
Precautions to observe when a customer gets on and off the seat
- When a customer gets on and off the seat, be sure to lower the seat to its lowermost posi-
tion. When a customer gets on and off a wheelseat, also make sure that the wheelseat is not
located within the operation range of the seat. If a foot or caster hits the foot control causing
the seat to unexpectedly move, the customer may get injured or the product may break.
- When a customer gets on and off the seat, guide the customer so that he/she does not trip
over the power cable or fall.
●
After using hot water, return the thermostatic control knob to the proper temperature
- After using hot water, return the thermostatic control knob to the proper temperature. If the
shower is used without returning the temperature setting, the customer or you may get
burned.
- If another device that uses a shared water/hot water supply source is used at the same time,
the water temperature may become unstable. If multiple devices are used, slowly turn the
thermostatic control knob to adjust the water temperature.
●
Never neglect the daily checks
If the product is used without implementing the daily inspection, injury or breakage of this
product may result.
Refer to [page 48 to 51] for daily checks.
●
Precautions for operation and setting up the presetting position of seat
- Before and during operation of the seat, pay careful attention to ensure that there is no part
of the body or object in or around the working range. Otherwise, you or the other person
may be pinched by the seat, possibly leading to breakage of this product or injury.
- When the seat is operated, confirm that the customer is sitting back in the seat and the feet
are on the step; keep your eyes on the customer during the operation.
- Do not touch an operation switch with a wet hand. There is a risk of electrical shock.
●
Turn the power off at the switchboard if this product is not going to be used for a long period
of time
Turn the power off at the switchboard if this product is not going to be used for a long period
of time, such as when the shop is closed. Failure to follow this instruction may cause ground
leakage fires, electric shock or burns due to insulation deterioration.
