49
Daily Inspections
Bouncing may cause incorrect operation in the seat.
Stop using the product.
Stop using the product if the seat does not stop a
certain period of time and lowers.
If water is leaking from the water outlet or base of the
shower head, the internal gasket may be worn and
replacement is required.
If hot water is not output properly or is cloudy, the check
valve strainers may be dirty. Clean the strainers.
[ page 45, 46]
If water sprays in random directions from several holes,
the spray nozzle may be blocked with water scale or
dirt. Remove the spray nozzle and clean it.
[page 42, 43]
If the water temperature cannot be adjusted properly or
if there is abnormal noise, there may be a problem with
the thermostat within the basin. Stop using the product
immediately.
Scratches, cracks, or peeling of the plating may cause
hand injuries.
When the water decreases quickly, there is a possibility
that the drain cap gasket has deteriorated. The drain
cap is a consumable part. Immediately replace it.
[page 41]
Clean the tape following the procedures outlined in
"mohair tape instruction" supplied with the mohair tape
(accessory).
Abnormal odor or smoke may cause abnormal opera-
tion or a fire. Stop using the product immediately, and
turn the power switch off.
Water leaks may cause malfunctions to the main body,
or make dirt difficult to remove. Wipe water away from
all parts other than the inside of the basin.
Is the seat operating
properly?
Is water output from
the shower head
properly?
Does the thermo-
static control knob
work properly?
Does the plating of
the thermostatic
control knob and tap
come off?
Can the basin be
filled with water?
Has the mohair tape
degraded?
Is there an abnormal
odor from the seat?
Is there any water
leaking from the
basin?
With the backrest lifted in its
highest position, push the backrest
toward the basin and check that
there is no bouncing.
Move the seat to any position, and
check that it has stopped and has
not lowered after a certain period
of time.
Turn the water on and check
visually that water is output from
the shower head properly, that
there are no water leaks from the
water outlet or base of the shower
head, and that the hot water is not
tainted.
Turn the thermostatic control knob,
check that the water temperature is
adjusted properly and that there is
no abnormal noise.
* An abnormal gushing sound may
be emitted as water flows.
[page 30]
Visually check the appearance of
the thermostatic control knob and
tap for scratches, cracks, or
peeling of plating on the plated
surfaced surface.
During operation or maintenance,
check whether there is any stuck or
a feeling of strangeness.
Check that the drain cap can be
used to block the drain and that
water filling the basin does not
drain.
Check that the mohair tape has not
peeled off, and that there is no
significant dirt or degradation.
Is there an abnormal odor from the
seat?
Check that there is no water on
parts other than the inside of the
basin.
Inspect item
Inspection method
If the inspection results show defects
Inspect the product every day
