42
Maintenance
Shower head
Shower head plate
Foaming water outlet
Rubber Gasket
O-ring
Shower head
The foaming water outlet should be rinsed with
running water in the direction shown in the
illustration below:
Running
Water
Foaming water
outlet
Water Discharge
Side
Surface to be Cleaned
(front and back)
Counterclockwise:
Removed
Clockwise: Attached
Shower head
Spray nozzle
Surface to clean
Rotate and detach the shower head
plate and remove the three parts
(shower head plate, foaming water
outlet, and rubber gasket).
Clean the shower head plate
(with water).
１
２
Clean the foaming water outlet with
water.
Reassemble the shower head.
３
４
Clean (wash) the spray nozzle.
１
- Clean the water spray plate once a week.
- Remove dirt, such as water stain in the
shower holes on the shower head plate,
with a toothbrush.
- Clean the unit once a month
(as a general guide).
- Remove dirt, such as water stain on the
foaming water outlet, with a toothbrush.
1) Insert the foaming water outlet and the
rubber gasket in the shower head plate in
this order.
2) Mount the shower head plate on the
shower head main unit, while the water
discharge side of the shower head plate
facing down.
Do not detach the O-ring.
Use an item such as a toothbrush to remove
any dirt such as water scale within the holes
where the water is output from the spray
nozzle surface.
Dual function shower head
Dual function shower head
YUME shower head
YUME shower head
1)
2)
