B e f o r e A s k i n g f o r R e p a i r
20
When a problem cannot be rectified even if an inspection is made according to the table shown below, immediately
stop using the equipment, turn off the power switch, disconnect the power plug, and immediately contact the nearest
dealer or our company directly.
Check if the customer's head position is
set away from the heater. (See page 13.)
Check if the customer's head position is
set away from the heater. (See page 14.)
Check if the ring crushed the other
appliance or the wall.
Phenomenon
Check Point
Countermeasures
The
indication illuminates.
The
indication illuminates.
The
indication illuminates.
The
indication illuminates.
The
indication illuminates.
Is main unit slanted by 30
degrees or over or is it down?
Alternatively, has the main unit
experienced a strong shock?
Turn off the power and keep the main unit
in as vertical position. If the error appears
again, contact the nearest dealer or our
company directly.
Turn off the power and keep the customer's
head position. If the error appears again,
contact the nearest dealer or our company
directly.
Turn off the power and keep the customer's
head position. If the error appears again,
contact the nearest dealer or our company
directly.
Turn off the power and keep the ring free.
If the error appears again, contact the
nearest dealer or our company directly.
Check if the customer's head position is
set away from the heater.
Turn off the power and keep the customer's
head position. If the error appears again,
contact the nearest dealer or our company
directly.
