10
５
６
７
８
９
10
Description of Keys and Indications
‑ Press this button to start the operation of each mode.
While the equipment is in operation, the button functions
as the stop (interruption) button.
Practice Mode Selection Buttons and Lamps
Lamp
‑ A mode can be selected by pressing the appropriate button.
To memorize the changed setup as the standard setup, press
and hold the button chosen at present for one second or longer.
(See the section "Changing and Memorizing the Mode Setup" on page 18.)
Partial Heating Buttons and Lamps
‑ The part to be heated can be chosen by pressing the
appropriate button.
(See the section "Partial Heating" on page 17.)
Lamp
Start/Stop Lamp and Lamp
Ring Rotation Button and Lamp
Mute Button and Lamp
Fan Button and Lamp
* Only for the specification with fan
Lamp
Lamp
Lamp
‑ Use the button to stop or rotate the ring at a desired position.
* Only for the manual mode
‑ Use this button to enable the buzzer sound to alert the
operator to button operation and the completion of the
operation processes or to disable (mute) the sound.
* Once the button is chosen, the state of the sound chosen
will be maintained until MUTE is pressed again.
Sound enabled: The MUTE lamp is off.
Sound disabled: The MUTE lamp is on.
* The error sound will not be turned off.
Lamp
‑ Use this button to enable (ON) or disable (OFF) the air
blowing from the fan.
‑ The cooling operation will be executed for two minutes after
completing the COLOR, PERM, or TREATMENT modes.
In addition, air blowing from the fan is possible even during
the practice.
