17
1
2
温度レベル、時間、加温ポジションの設定変更
設定内容を変更する場合は、お客様の毛髪の状態、使用する薬剤、施術内容に応じて変更して下さい。
●温度レベルの変更は温度レベルボタンで変更します。
●タイマー表示部が時間表示の時は時間設定キーで時間を変更します。また同様に、角度表示の時も
時間 設置キーで角度を変更します。
角度表示は△▽ボタンを押すごとに次のように切り替わります。
4
4
加温ポジションの違いによる加温状態
標準位置
フロントOFF
サイドOFF
ネープOFF
全 加 温
ポジシ
ョン
本体位置
8 0 m m
下げた
場
合
加温部
参 考
本体を標準位置より
80mm下げた場合
3
80mm
Rotation and Stopping of Ring during Operation
Pa r t i a l H e a t i n g
When either of the heating positions (FRONT, SIDE or NAPE) is turned off, the temperature
control is subject to the ON/OFF control of heater according to the programmed time.
The temperature control with the infrared temperature sensor will not be executed.
Set the respective parts in the correct position.
If the parts of the main unit are not set in the correct positions, the equipment will not operate correctly.
(See page 13.)
Choose a mode.
Press the practice mode selection button after turning on the power switch. At this time, check the
temperature level and the time set for the selected practice mode.
Press the Start/Stop button.
Press the Start/Stop button to rotate the ring under the selected conditions.
Choose a heating position.
Press a partial heating button (FRONT, SIDE or NAPE).
*The heater of the rotating ring can be set to OFF only when it passes the designated part.
Only for the Manual Mode
O p e r a t i o n
During operation
When the operation
is interrupted
When the operation
is resumed in five
minutes after interruption
During cooling time
After cooling time
S t a t e o f R i n g R o t a t i o n B u t t o n d u r i n g Op e r a t i o n
For regular use
(Ring rotation button: ON)
For use where the ring rotation is
stopped under the manual mode
(Ring Rotation button: OFF)
The ring rotates.
The heater is ON.
The ring stops at the position
when the button is pressed.
The heater is OFF.
The ring starts torotate.
The heater is ON.
The ring rotates.
The heater is OFF.
The ring rotates to the stop
position and stops there.
The heater remains to be OFF.
The ring stops at the position of
the manual mode stop.
The heater is ON.
The ring remains in the stop state.
The heater is OFF.
The ring remains in the stop state.
The heater is ON.
*The cooling time is not provided
for the fixed operation under the
manual mode.
