Before operation place the in-feed conveyor in a horizontal operating position:
• Remove safety carabiner;
• remove the support limiter;
• lower the in-feed conveyor to the horizontal position and support it using the supporting leg;
• set the supporting leg so that the upper rod on the conveyor belt in the middle of the in-feed
conveyor is slightly elevated above the table (factory default setting).
Activate the feeding by pushing the control handle (Joystick) to the right. The feeding can be
stopped at any time (when the log reaches the cutting length limiter) by pushing the handle
to home (neutral) position. To activate the feeding in the opposite direction push the control
handle to the left.
19
The conveyor is lifted and lowered by means of a manual winch, and at the desired height, it is
secured by a load chain to distribute the weight of the conveyor between the wire rope and the
supporting chain.
When using and maintaining the manual pulley, follow the manufacturer’s instructions that you
have received with these instructions.
6. MACHINE OPERATION
6.1. CONVEYOR
6.2. LOG FEEDING
Attention! If the feeding is active after the log reaches the cutting length
limiter, the in-feed conveyor belt can slip and can become damaged!
Summary of Contents for RCA 330 JOY
Page 40: ...40 ...
