• PTO shaft (grooved shaft 13/8” Z6 – DIN 9611A) must comply with the required engine
power of the machine (Specifications).
• The tractor PTO shaft must rotate clockwise. In case of EP12 (Electric Power Unit) the shaft
must also rotate clockwise.
• The recommended speed of the PTO shaft:
420 min-¹; maximum: 430 min-¹, minimum: 400
min-¹.
4.3. CONNECTING TO THE MAINS CIRCUIT
Plug the 3 pin plug into the tractor mains or EP 12 (Electric drive) unit (optional).
A voltage of 12 V and a constant current of 16 A must be provided on the power source, otherwise
the electrical system may be malfunctioning.
Minimum cross-section of the cables from the
power source should be 2,5 mm².
Always unplug the power cord after finishing work, otherwise the battery in your machine may
discharge.
4.4. ADDITIONAL EQUIPMENT SETUP
16
Use quick couplings to connect the hydraulic pipes (live decks or log loaders) and the machine
couplings. To ensure proper connection observe the label and the color covers of the couplings.
If you do not use the log loader, the use of a connection hose is obligatory.
Otherwise, the machine will not work properly!
Check the polarity on the
power source.
Summary of Contents for RCA 330 JOY
Page 40: ...40 ...
