background image

  2. PRESENTATION

2. Presentation

This chapter contains information you should be aware of when planning 
the instalation.

2.1 What's in box 

1

2

8

6

3

5

4

7

9

12

13

11

16

10

15

14

17

18

20

21

22

23

2

4

9

Consumable parts

1. Blade
2. Virtual wire
3. Virtual wire connectors
4. Pegs
5. Fuse

1

Clamshell: 
Open it to adjust cutting height.

2

Adjusting knob: 
Screw it to adjust cutting height.

3

Fuse

4

Charging terminal: 
Connect with Charger for 
recharging directly.

5

Ultrasonic sensor 

6

Charging head

7

Control panel

8

Emergency switch: 
Press it at any time, 
the mower turn off at once.

9

9

10

Blade

11

Blade sheld

12

Home button
Press it when it is operating,
it goes back to charging station
automatically.

13

Virtual wire light
Colorless: in good connecting
Red: Broken wire/ idle

14

Charging light
Red: charging
Green: full charged / idle.

15

Power terminal

16

Virtual wire terminal

17

Copper sheet

18

Charger

19

Virtual wire (100m):
Used to mark mowing area and 
create a virtual wall for the mower.

20

Virtual wire connectors (10pcs):
Used to connect virtual wire.

21

Pegs (100pcs):
Used for fix the virtual wire to the 
ground around the lawn perimeter
and around obstacles.

22

Stakes (4pcs):
Used for fix the charging station to 
the ground.

23

Fuse (2pcs)

24

Inner hexagon spanner

25

English user manual

  2. PRESENTATION

-

P8

-

-

P7

-

MOW

19

25

2

6

2

7

2

7

2

6

Remote control battery

Remote control

Handle (Human sensor) 
Touch it when it’s working, 
it stops at once.

Summary of Contents for L2700































Reviews: