5
.
USE
5.13 Recharging
- The mower could goes back to recharging automatically if it is power
less. Or press the Home button on the charging station, the mower also
goes back to station for recharge.
- The mower also can recharges by charger directly.
Steps as follow:
1. Press the clamshell and open it.
2. Unscrew the cap of charging
terminal.
3. Insert charger and screw the
knob.
4. Connect the charger to power
supplier.
Recharge Voltage:24V (Lead-acid battery) / 29.4V(Lithium battery)
Recharge current: 2A
Match the slop then
screw it!
-
P41
-
6
.
Maintenance and storage
6. MAINTENANCE AND STORAGE
- During maintenance operations, use the individual protections indicated
by the Manufacturer , especially when intervening on the blade.
- Before performing maintenance operations, make sure that the robot
has stopped in safety conditions.
PROGRAMMED MAINTENANCE INTERVALS CHART
See “Robot
cleaning”
See “Blade
replacement”
If the fuse is burned
down
See “Fuse
replacement”
Robot
Carry out cleaning
See “Robot
cleaning”
6.1 Robot cleaning
1.Stop the robot in safety conditions.
2. Wear protective gloves.
Frequency
Component
Type of operation
Reference
Every week
Every month
Blade
Fuse
Clean and check the
efficiency of the
blade
If the blade is bent due
to an impact or if it is
worn-out, replace it.
-
P42
-
The charger is not water-proof therefore it must be located on
a place which is dry and ventilated.
WA R N I N
