3. INSTALLATION
45
°
Rain shed
Greater than
50cm
- How to set virtual wire on the ground which has swimming pool.
Distance between
two wire: 1m
3. INSTALLATION
- Joining the boundary wire .
If the boundary wire is not long enough
and needs to be spliced: Use original
solderless couper. It is waterproof and
gives a reliable electrical connection.
To splice: Insert both cable ends in the
coupler. Now press down the button on
top of the connector fully. Use a pair of
pliers or the like, as the button on the
connector is difficult to press down by
hand
Correct corner set up,
using several angle to
avoid an angle of less
than 90
°。
Greater than
2.5m
- Care must be taken not to create a corner sharper shorter than 90
degrees when setting up virtual wire. A corner sharper less than 90
degrees can cause the mower to lose track of virtual wire. We can make
greater than 90 degrees corner like follow picture shows.
-
P24
-
-
P23
-
IMPORTANT INFORMATION
The charging station and charger is not water proof. It’s best to set
a Rain Shed above the charging station.
Proper setup in sharp corners
Incorrect corner
setup
