TAIYO ELECTRIC IND.CO.,LTD.
34
WARNING
CAUTION
●
High temperatures. Handle with care.
●
To avoid injury, do not touch the
metal part of the stand.
●
To prevent fire, do not use the
ST-21 near flam-
mable substances.
●
Always place the stand on a stable worktable, or other stable location,
to prevent injury or accident from dropping it.
●
To avoid splattering solder
scrap, do not swipe the tip of the iron across the brass wool. This is danger-
ous.
●
To prevent fire or personal injury, be sure that the stand has cooled
sufficiently before storing it.
Rub the soldering-iron tip on the moistened sponge.
Use the hole of the sponge for better cleaning.
Alternatively, push the soldering-iron tip in and out of the brass wool a few times. Stab,
not swipe.
Soldering Iron Stand ST-21 Instructions
INSTRUCTION FOR USE
Front Opening
Adjusting Screws
Heat-Resistant
Sponge
ST-53SP
Brass Wool
ST-40BW
ST-21MS
●
To avoid rust, do not pour water on the brass wool.
●
Sponge tray and hold-
ing flange (of the front opening) are made of phenol. Be aware that extended
tip-contact may result in their deterioration.
●
Remove the collected solder
scrap regularly.
The angle of the front opening can be
adjusted by loosening screws on the
side.
Tip Stand
ST-21C
RX-85HRT/RX-85HSRT
tips can be kept in the
slot in the center of the
stand.
RX-80HRT
tips
can be kept in
the holes on
either side of the
stand.
HOW TO USE
Summary of Contents for Goot RX-852AS
Page 35: ...TAIYO ELECTRIC IND CO LTD 35 ...
