manualshive.com logo in svg

Tait TP9310, User Manual, Page: 53 / 80

Share
Download
Tait TP9310 User Manual Download Page 53

 Operating in trunked mode  53

 

Transmit timer

Your radio may have a transmit timer that limits the 
amount of time you can transmit continuously.

When the transmit timer is about to expire, the LED 
flashes red, and the radio gives three beeps.

If the transmit timer times out, the call clears down.

Call time limit

In trunked mode, the length of your call may be limited 
by the network or by your radio.

Placing the radio in 

do-not-disturb mode

If you do not want calls for a while, you can place the 
radio in do-not-disturb mode, so that incoming calls 
can be ignored. You can make outgoing calls in the 
usual way.

Using a function key

1

Press the function key programmed for do not 
disturb, to activate the do-not-disturb function.

Your radio will now ignore all incoming calls.

2

To deactivate the do-not-disturb function, press 
the do-not-disturb function key again.

Activating do-not-disturb mode will result in a 
single short beep. Deactivating do-not-disturb 
mode will result in a single, short, low-pitched 
beep.

Summary of Contents for TP9310

















































































Reviews:

No comments