Tait TP9310 User Manual Download Page 16 | Manualshive

Page: 16 / 80

Tait TP9310 User Manual Download Page 16

16 For your safety

Unapproved modifications or changes

to radio

The radio is designed to satisfy the applicable
compliance regulations. Do not make modifications or
changes to the radio that are not expressly approved
by Tait. Failure to do so could invalidate compliance
requirements and void the user’s authority to operate
the radio.

Attaching of labels

Warning

Do not obstruct the vent hole on the battery

or the vent hole on the radio chassis label. If the vent
on the battery is obstructed, the battery may explode,
causing personal injury and/or damage to property. If
the vent on the radio is obstructed, audio quality and/
or key function may deteriorate and radio seals may
be damaged.

Caution

Tait recommends that you do not affix

additional labels to the surfaces between the radio
chassis and the battery. The fit between these
surfaces is intentionally firm and any added thickness
will damage the points of attachment between radio
and battery. If you must attach a customized label, use
only a thin gummed paper label applied to the bottom
25% of the radio chassis label and/or to the top 25%
of the battery label. Do not obstruct the vent holes
(see Warning above). Do not allow the paper label to
extend beyond the recessed label area or to conceal
relevant product information.

Use of lithium-ion batteries

Warning

A damaged battery can cause an explosion

or fire, and can result in personal injury and/or
property damage. To prevent personal injury and/or
damage to property, read the important safety
information supplied with the battery.

«
...
14
15
16
17
18
...
»

Summary of Contents for TP9310

















































































Reviews:

No comments