Tait TP9310 User Manual Download Page 10 | Manualshive

Page: 10 / 80

Tait TP9310 User Manual Download Page 10

10 For your safety

Radio frequency emissions limits in

the USA

CFR Title 47 Part 15.19 (a) (1) -

Receivers

Part 15 of the FCC Rules imposes RF emission limits
on receivers. This radio complies with Part 15 of the
FCC Rules. Operation is subject to the condition that
this device does not cause harmful interference.

CFR Title 47 Part 15.19 (a) (3) - All other

devices

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions.
(1) This device may not cause harmful interference,
and (2) This device must accept any interference
received, including interference that may cause
undesired operation.

Radio frequency emissions limits in

Canada

This device complies with Industry Canada licence
exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause
interference, and (2) this device must accept any
interference, including interference that may cause
undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil
doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en
compromettre le fonctionnement.

«
...
8
9
10
11
12
...
»

Summary of Contents for TP9310

















































































Reviews:

No comments