manualshive.com logo in svg

Tait TP9100 Series P25, User Manual, Page: 149 / 168

Share
Download
Tait TP9100 Series P25 User Manual Download Page 149

 Troubleshooting  149

 

For example, if the charger has firmware version 
2.02.01 installed, the red LED flashes twice, then 
the green LED flashes twice, and then the orange 
LED flashes once.

General care

Your radio requires no regular maintenance other 
than ensuring that the battery has sufficient charge 
and that no damage has occurred to the antenna or 
the battery.

Notice 

To prevent permanent damage to the radio 

case, do not allow the radio to come into contact with 
detergents, alcohol, aerosol sprays, or petroleum-
based products.

For general battery care, see 

"Maintaining battery life 

and performance" on page 166

.

Cleaning the contacts of the battery

Notice 

Do not scratch or scrape the contacts of the 

battery. If necessary, wipe the contacts of the battery 
with a dry, lint-free cloth to remove any dirt, oil or 
grease.

Cleaning the radio

If you need to clean the radio case, use a cloth 
dampened with clean water. Do not immerse the radio 
in fluids.

Summary of Contents for TP9100 Series P25









































































































































































Reviews:

No comments