Tait TP9100 Series P25 User Manual Download Page 109

Page: 109 / 168

Emergency operation 109

Making a manual emergency call

Warning

You will not be able to make a voice call on

the channel until the 3-second emergency alarm has
finished.

Press and hold the emergency key for longer than
three seconds.

The radio gives three short beeps, rising in pitch.

Emergency

appears in the display, and remains

until the manual emergency call is canceled.

If you receive an acknowledgement from another
radio in your group, the manual emergency call is
canceled, and the message

Emergency Acked

briefly appears in the display.

This feature is controlled by a software license
(SFE) and may not be available with your radio.

Receiving a manual emergency call

When your radio receives a manual emergency call,

Emergency

appears in the display, along with the

identity of the radio that initiated the emergency call.

A loud repeating emergency alarm sounds for three
seconds. If location information has been sent,

Location

appears in the display.

Emergency

Emergency
Acked
NWME42T1

alias of

acknowledging radio

Emergency

NWBE22M1

Location

radio in

emergency

location information

available

Summary of Contents for TP9100 Series P25









































































































































































Search results

Summary of Contents for TP9100 Series P25

Reviews:

Tait TP9100 Series P25, User Manual, Page: 109 / 168

Search results

Summary of Contents for TP9100 Series P25

Reviews: