Tait TP9100 Series P25 User Manual Download Page 130

Page: 130 / 168

130 Charging and caring for batteries

About the chargers

There are three types of charger available for your
Tait radio battery:

■

Desktop charger: Small enough to
fit on a desk, it charges one bat-
tery at a time.

In Brazil, portable radios are
only allowed to use the desktop charger.

■

Multicharger:
Charges up to six
batteries. It can be
mounted on a desk,
on a wall, or in an
equipment rack.

Warning

The multi-charger must be connected to an

earthed mains socket-outlet.

■

Vehicle charger : Charges one bat-
tery at a time while installed in a
vehicle.

Notice

Tait recommends that you use a

desktop charger or multicharger, not the
vehicle charger, to prime a nickel metal
hydride battery (see

page 27

). After a

battery is primed, the battery does not
require regular additional charging in a desktop
charger or multicharger.

Unless otherwise indicated, the charging advice and
instructions in this chapter apply to all chargers.

Special conditions when using

IS radios

Warning

Fit only an IS-approved battery to an IS

radio. Fitting a battery or accessory that is not IS-
approved exposes the customer to a risk of explosion
which could cause serious injury or death.

Summary of Contents for TP9100 Series P25









































































































































































Search results

Summary of Contents for TP9100 Series P25

Reviews:

Tait TP9100 Series P25, User Manual, Page: 130 / 168

Search results

Summary of Contents for TP9100 Series P25

Reviews: