Tait TB7300, Installation And Operation Manual

Page: 32 / 89

32 Working with Base Stations from Your PC TB7300 Installation and Operation Manual
© Tait Limited November 2016
4.2.2 Setting the IP Address
Before the base station is installed on site, you need to provide it with its
proper IP address. Make sure that you do not lose this address.
1. Select Identity > Identity > Network.
2. Enter the required details in the Change network identity area and
click Save .
4.2.3 Security Certificates
You can upload your own security certificates to the base station (Tools >
Settings > Web certificate). If you have installed and configured the
appropriate Certification Authority software, you can issue security
certificates for all base stations. After uploading the certificates to the base
stations, you can configure all maintainers’ web browsers to accept
security certificates from your own Certification Authority.
Before you have uploaded a security certificate to the base station, it
will raise a security warning when your browser connects to it for the
first time. The base station creates a self-signed certificate when the
firmware is installed. Your browser raises a security warning because
the security certificate was not issued by a trusted Certification Author-
ity. The browser has a way of letting you override or bypass the security
warning.