Tait TB7300, Installation And Operation Manual

Page: 15 / 89

TB7300 Installation and Operation Manual Description 15
© Tait Limited November 2016
1.4 Licenses
Some operational functions of the base station are controlled by licenses.
These functions will not work unless you purchase the appropriate feature
license and enable the feature set controlled by that license. The feature sets
currently available are listed below.
The base stations in a Tait DMR Tier 3 Network are controlled by a node
(DMR trunking controller). The TB7300 is compatible with two types of
Tait node: Express and Access. Each type of node has different capabilities.
Refer to TN-2134 for more information.
Analog Air Interface
(TBAS301 - Default
Licence)
A base station with this licence can operate as an MPT transceiver or an
analog conventional repeater.
DMR Trunking
Express
(TBAS302)
A base station with this license can accept connections from any Express
node/standalone node or Access standalone node. In single-site trunking
and fallback modes, this license entitles a standalone node to control a
single site of up to 20 physical channels.
DMR Trunking
Access
(TBAS303)
A base station with this license can accept connections only from an Access
standalone node. This license entitles a standalone node to control a single
site of up to four physical channels.
DMR Conventional
(TBAS304)
A base station with this license can operate in a Tait DMR Tier 2
conventional network. It can operate as a stand-alone repeater, or as a
member of a multi-site system (under the supervision of a DMR
conventional node).
A base station with both a DMR Conventional license and a valid DMR
trunking license (such as Express or Access) can be configured to operate
in either mode. This enables a DMR Tier 2 base station to be reconfigured
and re-used in a DMR Tier 3 trunked network.