Tait TB7300, Installation And Operation Manual

Page: 26 / 89

26 Operation TB7300 Installation and Operation Manual
© Tait Limited November 2016
The indicator LEDs on the front panel are shown in Figure 3.1 . They allow
monitoring of the base station’s operational status.
Power LED
The green power LED is lit when power is supplied to the base station.
Alarm LED
The red alarm LED flashes when an alarm has been generated by any of the
base station modules. It will continue to flash until the alarm is canceled or
the fault is fixed. Note that only those alarms which are enabled using the
web interface will cause this LED to flash.
Receive LED
The amber receive LED indicates whether the base station is receiving a
valid RF signal on one or both logical channels.
Figure 3.1 LEDs on the front panel
b
power LED
d
receive LED
c
alarm LED
e
transmit LED
b
c d e
d
e
LED Description
Flashing One or more faults are present.
On (steady) A base station is in Offline mode, and no faults are present.
Off A base station is in Online mode, and no faults are present.
f
LED Description
On (steady) A base station is receiving a valid RF signal.
Off A base station is not receiving a valid RF signal.