Tait T800 SL2 25W, Service Manual

Page: 177 / 383

M8SL2-00-002-812
T854 Functional Testing C4.1
© Copyright Tait Electronics Limited August 2004. All rights reserved.
4 T854 Functional Testing
Caution:
This equipment contains CMOS devices which are susceptible to dam-
age from static charges. Refer to Section 1.2 in Part A for more informa-
tion on anti-static procedures when handling these devices.
The following test procedures will confirm that the T854 has been tuned and adjusted
correctly and is fully operational.
Note 1: In this and following sections deviation settings are given first for wide
bandwidth sets, followed by settings in brackets for mid bandwidth sets ( )
and narrow bandwidth sets [ ].
Note 2: Unless otherwise specified, the term “PGM800Win” used in this and follow-
ing sections refers to version 4.02 and later of the software.
Refer to Figure 4.4 for the location of the main tuning and adjustment controls, and to
Section 3.3 for the test equipment set-up. Refer also to Section 6 where the parts lists,
grid reference index and diagrams will provide detailed information on identifying and
locating components and test points on the main PCB. The parts list and diagrams for
the VCO PCB are in Part E.
The following topics are covered in this section.
Section Title Page
4.1 Current Consumption 4.3
4.2 Output Power 4.3
4.3 Output Frequency 4.3
4.4 Timers 4.4
4.5 Frequency Response 4.5
4.6 Audio Level Input Sensitivity 4.8
Figure Title Page
4.1
4.2
4.3
4.4
T854 Transmit Timers
T854 Pre-emphasis Response
T854 Limiting Response
T854 Main Tuning and Adjustment Controls
4.4
4.6
4.7
4.9