Tait T800 SL2 25W, Service Manual

Page: 256 / 383

D1.14 General Information
M8SL2-00-002-812
© Copyright Tait Electronics Limited August 2004. All rights reserved.
1.4.2.1 Facility Interface and Service Order Codes
1.4.3 Europe
For Declaration of Conformity refer to eudocs.taitworld.com
According to the requirements of the EC Council Directive:
1999/5/EC Radio Equipment and Telecommunications Terminal Equipment Directive,
The T803-02-0000 Tone Remote and Alarm Interface complies with;
• EN60950 : 2000 Electrical Safety
• EN 301 489-5 Radiated and conducted emissions, and electromagnetic susceptibil-
ity specifications. Compliance to this standard is subject to the fitting of an addi-
tional EMC filter to the 2-wire/4-wire line interface. For more information see the
following section.
1.4.3.1 Additional EMC filter fitting instructions
Applicability
In order for the T803-02 to comply with the RF electromagnetic field immunity require-
ments of the EMC standard EN 301 489-05 (07-2000), an additional filter must be fitted
to the 2-wire or 4-wire line when the unit is installed. This filter, a clamp-on ferrite,
helps prevent electromagnetic energy from being coupled into the product.
Required Component
The T803-02 Tone Remote and Alarm Interface unit is supplied together with the follow-
ing separate EMC Filter:
Unit Configuration Function
USOC
Jack type REN
a
a. Ringer Equivalence Number
FIC
b
b. Facility Interface Code
SOC
c
c. Service Order Code
T803 2-wire 2-wire leased line RJ-11C — Metallic 7.0Y
T803 4-wire 4-wire leased line RJ61X — Metallic 7.0Y
IPN 069-00010-31
Description Clamp-on ferrite EMC filter for 13mm diameter cable
Manufacturer and part number Fair-Rite Part No. 0431 164181