Tailift TPR720A, Operation Manual

Page: 9 / 86

2-2
2.3 The machine
2.3.1 Description
Radial drills are purposely designed to process bulky objects. Tailift has 20 years
of history and experience in behind. It knows radial drills certainly very well.
Tailift radial drills will be your best choice. The material that the machine can
process on are : mild steel, metal, stainless steel, cast iron, aluminum, copper,,,, etc,
except magnesium alloy. (Note 1)
Note 1: Processing magnesium alloy may cause fire.
2.3.2 Parts
Ⅰ
Ⅰ Ⅰ
Ⅰ
. For TPR-720A, TPR-820A, TPR-920A
There are six categories of parts on the radial drill: Gearbox, Arm, Column,
Top Cover, Box Table and Base. The following are its description and locations.
1. Base The main aim of the base is to support the whole weight of the
machine. In addition, the cutting fluid is contained here and the
Box Table is installed on.
2. 2. 2. 2.
Gear box It is the core part for the radial drill for all procession is finished
here, like speed switch, auto feed, spindle,,, etc. They are inside
of the gearbox.
3. Arm It is to support the gearbox and is connected with the column.
4. Column It is to support the gearbox and the arm. It connects the base.
5. Top Cover It is on the top of the machine, where there is a motor. The
motor is to run the gearbox, rise and lower the arm.
6. Box table Working with clamps, it enables to reach the required accuracy.