AG-1000 User’s Manual
SMS Alert Gateway
All contents are subjected to change without prior notice
Rev 7.3
Page 27 of 27
Copyright © 2005 Taiko Network Communications Pte Ltd
Appendix C: Connection instruction for extended IO.
The following steps are to connect up the SMS Alert Gateways for IO extension.
1.
Connect up the devices physically from D+ to D+ and D- to D-.
2.
Referring to the manual of AG1000-10, set the 2 AG1000-10 to slave ID to 1 and 2 respectively
and baud rate to 19200, no parity, 1 stop bit, no flow control.
3.
Open the Web configuration page. Select numbers of slaves based on how many units are
attached to the AG1000-10.
4.
After configuration, disconnect the Ethernet connection.
Slave 1
Slave 2
