AG-1000 User’s Manual
SMS Alert Gateway
All contents are subjected to change without prior notice
Rev 7.3
Page 25 of 27
Copyright © 2005 Taiko Network Communications Pte Ltd
c
xxx failed to acknowledge
The acknowledgement
failed because either the
contact point is not under
alarm condition or alarm
message has been sent to
hand phone users.
2
get xxx.
Request current
status of a contact
point.
a
xxx is close/open
<alarm><hhmm>
The contact point is
currently under alarm
condition
b
xxx is close/open <alarm
acknowledged><hhmm>
The contact point is
currently under alarm
condition, but someone
has acknowledged it by
SMS
c
xxx is close/open
<normal>
The contact point is
currently under normal
condition.
3
set xxx 1.
Set relay output to be
alarm condition.
xxx is close/open
The relay output is
triggered. The request is
not accepted if the output
was under alarm condition
previously.
4
set xxx 0.
Recover relay output
from alarm condition
xxx is close/open
The relay output is
triggered. The request is
not accepted if the output
was under normal
condition previously.
5
act xxx 1.
Activate a contact
point.
xxx is activated
The contact point is
activated. The request is
not accepted if the point
was activated previously.
6
tim
Synchronize the
internal clock of
gateway.
internal clock is reset
The internal clock of SMS
alert gateway was
synchronized.
7
act xxx 0.
Deactivate a contact
point.
xxx is deactivated
The contact point is
deactivated. The request
is not accepted if the point
was deactivated
previously.
8
hp xx,null.
Delete a handphone
number from list.
(only for
administrative hand
phone users)
a
hp:xx is changed to
hp:null
The first hand phone
number found from the
alarm group list was
deleted. All the number
follow by the deleted
number will be shifted up,
if any.