-6-
• Is the power cord plug fully pushed into the wall outlet?
• Is the sake warming temperature set at OFF?
After-Sales Service
Before Calling a Service Person
Before calling a service person, carefully read this manual and check the following.
Trouble
Sake is not warmed.
Sake is dispensed, but too little.
• Use the manual button to operate until sake comes out smoothly.
This can often occur when cubic container are replaced.
It is caused because air in the pipe is pushed out.
• Check whether the nozzle area is contaminated.
If contaminated, neatly clean the electrode part (metallic rod) in the
nozzle by the use of a tooth brush.
Temperature does not rise.
• Is the water bath tank full with water at the level of water level indicator?
Feed water or warm water through the water tank inlet.
• Considered to be a problem in the temperature sensor.
In this case, the replacement of sensor is required.
Temperature rises too high.
• Is the sake warming temperature set at a favorite level?
• Considered to be a problem in the temperature sensor.
In this case, the replacement of sensor is required.
Check
Disassembly Prohibited
Very special techniques are required for repairing.
Users are absolutely prohibited to carry out overhaul and fixing.
*
The specifications and part of the appearance are subject to change for improvement without notice.
TSK-130B
Heating method
Electrical (indirect heating)
Rating
110-120V AC, 50/60 Hz
Sake feeder
Cubic container, 5 to 18 liters
Power consumption
1kW
Water bath tank, Approx. 4.7 liters
Weight
Approx. 9.3kg
Dimensions
W 250 x D 375 x H 515 mm
Power cord
Rubber sheathed cord,
2m in effective length
Accessories
Bottle holder funnel, 1 pc.
Silicone tubing, 1 pc.
Stopcock, 1 pc.
Specifications
TAIJI & CO., LTD.
8-2, Okawa-cho, Kawasaki-ku, Kawasaki--shi, Kanagawa-ken 210-0858, Japan
Telephone: 81-44-329-6338 Fax: 81-44-329-5860
URL http://www.taiji.co.jp/e
Email: [email protected]
Printed in Japan
(2310G)
