4.3.2 LCD configuration menu
When the “Interpretation setup” has been configured in
the CMU, and then the interpreter unit must be
configured:
If the interpreter unit has not been configured,
the LCD will display “UNIT NOT INSTALLED”;
If the interpreter unit has been configured, the
LCD will display the standby interface.
Icon on LCD:
Icon
Indicating
Headset inserted
Headphone inserted
Booth:05
Bluetooth: On
Booth:05
Bluetooth: Connected
Message received
Audio feedback: On
REP:8s
Repeat function and repeat
time
00:00:05
Speech time
05:ENG
Loudspeaker channel
2016-01-21 09:00
System current time
06
Output channel is interpreting
Call operator
99+
Quantity of listeners
●
REC
Audio stream is in use
Monitor channel is muted
Output channel is muted
A
）
Accessing menu
In the menu operation of the interpreter unit:
If unit not installed, press the function knob to enter
the setting menu;
Press the return (
) button to activate the LCD
menu, if no operation in 5 s, menu exits; and if press
any other buttons, menu exits too.
In the following operation:
Turn the function knob to select LCD menu or adjust
parameters value;
Press the function knob to confirm/go to submenu;
Press the “
” button to return/exit.
Press any other buttons, menu exits to standby
interfaces
B
）
Menu configuration
The LCD menu includes:
Brightness
Bluetooth
Setting
About
Skin
Brightness
Turn the Function knob to adjust screen brightness,
then press the Function knob to confirm or press the
“
” button to return.
Bluetooth
Turn the Function knob to select among On, Off or App,
the selected item becomes highlighted, then press the
Function knob to confirm or press the “
” button to
return. The default Bluetooth status is
Off
, If Bluetooth
is
On
but cannot connect after 3 minutes, it will be off
automatically.
9
