Taiden HCS-5100, Installation And Operating Manual

Page: 28 / 64

19
→ “Alarm Setting”
→ “About”
In
“Master - Interp. U”
mode:
→ “Work Mode”
→ “Simultaneous Interpretation”
→ “Floor Input Sen. Setting”
→ “IR Audio In Gain Setting”
→ “SI Channel Parameters Setting”
→ “Floor Distribution Setting”
→ “Floor DRC Limit Setting”
→ “Sampling Rate Setting”
→ “Front Panel Radiator Setting”
→ “Operation Language Setting”
→ “Time Setting”
→ “Time Display Setting”
→ “Network Setting”
→ “U-disk Function Setting”
→ “Machine Rename”
→ “Parameters Backup/Restore”
→ “Alarm Setting”
→ “About”
In
“Master - Central U”
mode:
→ “Work Mode”
→ “IR Audio In Gain Setting”
→ “Front Panel Radiator Setting”
→ “Play Floor on Unused SI Chs”
→ “Operation Language Setting”
→ “Network Setting”
→ “U-disk Function Setting”
→ “Machine Rename”
→ “Parameters Backup/Restore”
→ “About”
In
“Slave”
and
“Bypass”
mode:
→ “Work Mode”
→ “Operation Language Setting”
→ “Network Setting”
→ “Machine Rename”
→ “Parameters Backup/Restore”
→ “About”
Press the “MENU” button to go to the
corresponding submenus.
To switch from term to term use the “ / ” button.
To exit the current menu and to return to the upper
level menu use the “EXIT” button.
2.6.1 Work Mode
a)
Use the “ / ” button to switch between “Master”,
“Slave” and “Bypass”;

“Master”, use the “MENU” button to confirm and go
to step b);

“Slave” or “Bypass”, use the “MENU” button to
confirm and go to step c);
b) Use the “ / ” button to select the master mode
interface, switch between “Analog”, “Interp. U” and
“Central. U”;

“Analog”, SI audio signal input from AUDIO IN
interfaces of transmitter;

“Interp. U”, SI audio signal input from Interpreter
unit(s) connected to the transmitter;

“Central U”, SI audio signal input from main unit(s)
connected to the transmitter
；
c). Transmitter needs to restart to implement working
mode configuration. Use the “ / ” button to select
reset now or not.
Note:
In combination mode, the sensitivity must be
setup on the “Master” unit to make them
coincident on “Master” unit and “Slave” unit; in
this mode, carriers of audio signals of the
“Slave” unit are also setup on the “Master”
unit.