18
2.6 Configuration and operation
Via an interactive menu on the LCD and 4 operation
buttons.
A) Starting initialization:
Switch on the HCS-5100M/N transmitter. The current
status of the transmitter will be displayed on the LCD:
If the status is
“Master” mode (N) or (C)
, basses
different types of the master mode interfaces, it has
different modes, include: “analog”, “interp. U” and
“central. U”.
“Master – Analog” mode
The display shows: “Total Channels”
“Monitor Channel”
“Work Mode”
“Master (N)”
= NO slave transmitter connected
“Master (C)”
= Transmitter in combination mode
And
Slave transmitter connected
Please refer to 2.6.1 for detailed description
.
“Master - Interp. U” mode
When the HCS-5100MA(F)/N transmitter is connected
to the conference main unit via the 6P-DIN interface,
the simultaneous interpretation status will be displayed
on the LCD.
“Master - Central. U” mode
When the HCS-5100MA(F)/N transmitter is connected
to the conference main unit via the DCS / 6P-DIN
interface, the simultaneous interpretation status will be
displayed on the LCD.
If the status is
“Bypass”
mode, the display shows:
“Work mode”
“Monitor Channel”
If the status is
“Slave”
mode, the display shows:
“Connection status”
“Monitor channel”
B) Accessing “Main” menu:
Press the “MENU” button. Depending on the
transmitter work mode, the LCD display shows the
terms:
In
“Master - Analog”
mode:
→
“Work Mode”
→
“Carrier(s) Setting”
→
“Channel Name Setting”
→
“Audio Input Sensitivity”
→
“Auxiliary Input Setting”
→
“Front Panel Radiator Setting”
→
“Operation Language Setting”
→
“Network Setting”
→
“Use Testing Audio Signal”
→
“U-disk Function Setting”
→
“Machine Rename”
→
“Parameters Backup/Restore”
Note
:
Only one mode can be connected at a time, when
switching another mode, please cut off the last
connection at the same time.
