2.1.4.5 Language Setting
5. “LED”
Press the “
Õ
/
Ö
“ button to select “LED” and press the
“MENU” button to enter the LED test interface, shown
in the following figure. The LEDs on all connected
contribution units will blink immediately.
To setup the language displayed on the LCD menu.
Available options are Simplified Chinese, Traditional
Chinese and English, etc.
a). Press the "
Õ
/
Ö
" button to select LCD display
language;
Press the “EXIT” button to exit the LED test interface.
b). Press the "MENU" button to save and return to the
upper level menu.
6. “Status”
Press the “
Õ
/
Ö
” button to select “Status” and
press the
“MENU” button to confirm.
2.1.4.6 About
CMU information includes: firmware version,
corporation information and series number, shown as
in the following figure - press any button to return to the
upper level menu.
The total numbers of microphones, loudspeakers, and
speaking requests can be shown.
Press “MENU” or “EXIT” to return to the upper level
menu.
2.1.4.7 Volume control
The volume can be adjusted by the volume knob on the
CMU front panel - LINE IN VOL. adjust knob and
MASTER VOLUME adjust knob. Meanwhile, the
corresponding volume indicator will be displayed on the
LCD, as shown in the following figures:
2.1.4.8
Connecting to PC
When connecting the CMU to the PC, its front panel will
be locked and setup operation cannot be accessed, as
shown in the following figure:
20
