Taiden HCL-404, Installation And Operating Manual

Page: 47 / 78

39
HSP-110 10-inch Two-way Loudspeaker

The bottom comes with a Ø35mm support rod socket, which is suitable for support installation;

The speaker box is arranged with twelve M8 hanging points;

Optional HSP-110BKTU bracket, wall or ceiling mount, support 40° rotation.
Dimensions of HSP-110BKTU
Before rotation Rotate to maximum Angle (40°)
Installation diagram (side)
Before rotation Rotate to maximum Angle (40°)
Installation diagram (back)
The HSP-110BKTU comes standard with three M12×100 mm expansion bolts and two M8 flat head screws:
1) Three M12×100 mm expansion screws are used to lock the U-bracket firmly on the load-bearing wall surface. Note: if
hoisting is selected, the U-bracket can be firmly suspended by threading rods of appropriate length through the three
Ø13.0 holes of the U-bracket;
2) After the U-bracket is fixed, remove the screws on the top and bottom of the loudspeaker box for fixing points and replace
them with two M8 screws standard in the bracket packaging, but do not lock them;
3) Remove the M6 screws used to locate the rotation angle and keep them;
4) Lift up the loudspeaker box, and the two M8 screws protruding from the box are stuck into the buckle of the U-bracket;