Taiden HCL-404, Installation And Operating Manual

Page: 16 / 78

8

Send: synchronizes the parameter settings from the current project file to HCL-804A;

Delete: delete HCL-804A;

SynSystemData: including Send and Receive operations
Receive: synchronizes the parameter settings from all HCL-804A to the current project file
Send: synchronizes the parameter settings from the current project file to all HCL-804A which included in the
project file;

Reconnect: reconnect device.
Click "Receive / Send" to enter the HCL-804A setting interface, as described in the following chapter. HCL-804A supports
the saving of 10 parameter setting scenarios. Any modification of the following parameters can be saved to the user
program. The previous setting scenario can be called by Load user Program. If called the "Empty" user program, the
column returns to the factory setting state.
Figure: Parameters setting interface
2.7.3 Input Gain
HCL-804A supports simultaneous input of AES / EBU and analog signals for hot backup of each other. HCL-804A has a
built-in power amplifier. In order to protect the driver units, the input gain is set to -100 and the gain switch is set to "OFF",
the phase is "+".
Figure
：
Factory setting of input gain