background image

www.TagaHarmony.com

IMPORTANT!

Your product is marked with the symbol as showed on the left.

For EU (European Union) member users:

According to the WEEE (Waste electrical and electronic equipment)

Directive, do not dispose of this product as household waste or commercial waste.

Waste electrical and electronic equipement should be appropriately collected and 

recycled as required by practices established for your country.

For information on recycling of this product, please contact your local authorities, your 

household waste disposal service or the shop where you purchased the product.

Your product is marked with the symbol as showed on the left.

For EU (European Union) member users:

This product has been tested and found in compliance with

requirements of the European Community

2014/30/EU (EMC) & 2014/53/EU (RED) & 2014/35/EU (LVD) directives.

Master Speaker    

1EA 

Slave Speaker    

1EA 

Cut-out Template   

1EA 

Speaker Cable    

1EA 

Power Adapter   

1EA 

Power Cord 

 

1EA 

Instruction Manual 

1EA

TAGA EUROPE

POLPAK POLAND Sp. z o.o.

AL.JEROZOLIMSKIE 333A

05-816 REGUŁY k/WARSZAWY, POLAND

Email: [email protected]

High-Frequency 

Driver

25 mm (1”) TPTTD dome 

Swivel mount

Bass / Midrange 

Driver

165 mm (6.5”) Kevlar

®

Built-in Amplifier 

Power

2 x 30W RMS 

110W Dynamic Peak

HPCDA Class D

S/N ≥  92dB

THD ≤ 0.2%

Frequency Response

38Hz - 25kHz 

Sensitivity

89dB (1W / 1 m) 

Input Sensitivity: 400mV (RCA / 3.5 mm)

Connectivity Wired

LINE IN stereo (RCA / 3.5mm)

Connectivity 

Wireless

Bluetooth

®

 v4.0

Power Requirements 

& Consumption

AC 100-240V 50/60Hz; 70W 

(external adapter 12 x 5.2 x 3.2 cm)

Dimensions (Dia x D) 23 x 9.5 cm

Minimum Mounting 

Depth

130 mm 

Cutout Dimensions 

(D or H x W)

198 mm

Weight

Active: 1.3 kg / Passive 1.2 kg

Finish

WHITE, PAINTABLE (with grill on)

Bluetooth

®

 

is a registered trademark of Bluetooth SIG., Inc.

We reserve the right to change the technical data and the design of the product without notice as a result of further development.

Kit Content

Specifications

Summary of Contents for RB-1650BT





















Reviews: