manualshive.com logo in svg

Taga Harmony RB-1650BT, Instruction Manual, Page: 12 / 20

Share
Download
Taga Harmony RB-1650BT Instruction Manual Download Page 12

12

IR RECEIVER Switch 

Configure the switch:

 

FRONT – the IR Receiver located on the front panel of the master speaker is active 

(you can operate the system by pointing the remote controller to the front panel). 

REAR - the IR Receiver located on the rear panel of the master speaker is active (you 

can operate the system by pointing the remote controller to the rear panel). 

OFF – both front and rear IR Receivers are deactivated. The system is used as a 

“slave set” in the Daisy-Chain connection.

 

Integration into an AV Control System via RS-232 

 

This system can be integrated into your AV control system.  

If you want to use this system with your AV control system connect a 3-conductor 

communication cable (no supplied with this product)  to the RS-232 terminal located on 

the rear of the master speaker. 

The pins are marked with Tx, Rx and GND: 

Tx – transmits data to the control system 

Rx – receives data from the control system 

GND - ground  

Note! 

RS-232 control codes are provided at the end of this instruction manual.

 

  

Please refer to your control system instruction manual or contact TAGA Harmony 

dealer or installer for more information.

 

 

Connecting Power Adapter 

The DC cable of the Power Adapter is ended with the Phoenix plug – insert it firmly into 

the POWER input terminal (BLACK color) located on the rear of the master speaker.

Summary of Contents for RB-1650BT





















Reviews:

No comments