CONTROL FROM THE CD-RECEIVER
You may control the playback on your audio source device and for basic functions from
the CD-Receiver.
Note!
Not all audio sources may be controlled by the CD-Receiver.
• To pause/resume play, press ►ll.
• To skip to a track, press l◄◄ / ►►l on the front panel or ►l / l◄ on the remote
controller.
PAIRING HISTORY CLEARING
Select the Network input. [NETWORK MODE] will be displayed.
When in the [NETWORK MODE] press the button for 8 seconds or longer to clear
network (w-fi) and
Bluetooth
®
connected history – [RESET] and % of operation pro-
gress will be displayed. A voice prompt will be audible in speakers or headphones.
Note!
It resets all connections data, login data to streaming and Internet radio service
and restores the default name of the device.
Note!
Please refer to your audio source user instruction for details on operating the
Bluetooth
®
.
Operation and names of specific functions may vary on different devices.
Important Notes - Bluetooth
®
Connection
1. When you want to use another
Bluetooth
®
audio source than currently active, you
have to disconnect the active connection and start the
Bluetooth
®
connection
procedure.
2. Make sure that there are no objects placed between an audio source and the
CD-Receiver obscuring the
Bluetooth
®
signal which may result in unstable or no
connection.
3. This unit supports A2DP (Advanced Audio Distribution Profile).
Note!
The above listed functionality may vary on different
Bluetooth
®
audio sources
(smartphones, computers or other compatible devices).
For some audio source devices it may take a shorter or longer period of time to recon-
nect to the CD-Receiver or it may even require to repeat the pairing procedure each
time the
Bluetooth
®
connection is lost.
Note!
If your
Bluetooth
®
audio source is not able to find the “HTR-1500CD ####”
device or connect to it then switch off, clear the pairing history and repeat the pairing
procedure.
Play via Bluetooth
®
33
