Taga Harmony HTA-700B v.3-USB, Instruction Manual

Page: 8 / 20

8
Rear Panel:
12. Analog Stereo RCA Inputs CD / LINE
13. Preamplifier Stereo RCA Output
14. Digital Optical Input
15. USB Input Port*
16. Bluetooth
®
Antenna and Antenna Socket
17. Speaker Right Channel Output (Speaker Connectors)
18. Speaker Left Channel Output (Speaker Connectors)
19. Power Cable Input and Fuse Box
Note!
A blown fuse should be only exchanged for exactly the same type as
indicated on the rear amplifier panel. The Power Cable should be disconnected!
*(only HTA-700B v.3-USB model)
Hooking Up Speaker Cables
The Speaker Connectors can accommodate up to 10AWG speaker cables as well as most of
popular plugs (banana etc.). A 10AWG cable is recommended for longer connections (longer than
20 meters / 66 feet). For shorter lengths you can use 12/14 or 18 AWG cables.
It is recommended to leave about 150 cm (5 feet) of extra cable at the amplifier end to facilitate
positioning and installation of the amplifier.
Do not use staples, nails or other metal objects to secure the cables. You will get the best sound
quality and least amount of hum by keeping the cables away from other electrical wires and
cables.
Pay attention to connecting the polarity of the amplifier correctly with the speakers in each
speaker group (speakers should be connected RED + with RED + amplifier connector, BLACK –
with BLACK – amplifier connector).
Before connecting make sure that your amplifier is switched off.
Please refer to your speaker instruction manual for more information.
Front and Rear Panel
/HTA-700B v.3-USB model shown/