Taga Harmony HTA-700B v.3-USB, Instruction Manual

Page: 13 / 20

3. You can now listen to the playback from the computer and amplifier.
4. You can also control playback settings through the USB BRAVO-HD Audio Device
Control Panel (Figure 2).
• Start the BRAVO-HD program from the desktop or program menu. The BRAVO-HD
Control Panel will appear.
• If the amplifier is switched on and connected to the computer the panel will display:
- The current default format (sample and bit rate) as
selected in the Windows
®
system. Changing will affect
a default format of your audio device in the Windows
®
system.
- The current setting of playback via ASIO (preferred bit
rate and buffer size).
Click to change.
Note!
• If the sound is unstable and noisy lower the sampling
frequency and restart the playback.
• The bit rate setting should be the same as or higher
than the playback file. Otherwise the bit rate or output
is lower than the original.
• For some files if the bit rate is set too high such files
may not be played.
• [USB BRAVO-HD Audio Device Control Panel] setting
the smaller buffer size for a higher resolution music file
may cause noises or interruption. Set the buffer size to
bigger and restart the playback.
• You may also need to adjust the volume in your music
player software.
Note! Operation and user interface may vary depending
on your Windows
®
version.
Operation
13
Figure 1